Partiwall® Separating System

Partiwall® Separating Wall System

Introduction

Partiwall® is ideal for separating walls between attached dwellings.

The pioneering system of its kind in New Zealand, USG Boral Partiwall® has become one of the most widely used separating wall systems in attached villa units and townhouse developments.

Partiwall® is a twin stud wall system, which incorporates a single or double layer 25mm Shaftliner™ plasterboard fire barrier within the wall cavity.

Shaftliner panels are held in position by lightweight steel H- or I-section studs. Installation of Shaftliner fire barrier is carried out during the framing stage and does not require plasterboard screw fixing, jointing or finishing. The internal wall linings are installed at the plastering stage using conventional installation methods.

Partiwall® permits easy incorporation of services and does not require penetration and perimeter treatment associated with traditional fire-rated systems.

  • Cost-effective and fast to construct
  • No wet trades required
  • No additional trades required at framing stage
  • Conventional installation of internal linings at plastering stage

Fire ratings up to FRR 90/90/90

Acoustic ratings up to Rw/STC = 66dB

BRANZ Appraisal No. 898

Applications:

  • Separating walls between attached dwellings
  • Timber or steel framed buildings

Sustainability:

GECA certified plasterboard 

    1. Solutions
    2. Plasterboard Systems
    3. Partiwall® Separating System
 
Back to Top
    • .
    • .
    • .
usgb

© 2018 USG Boral. All rights reserved. USG BORAL, SAG-DEFYING STRENGTH, INNOVATION INSPIRED BY YOU and MULTISTOP are trademarks of USG Boral Building Products or one or more of its affiliates. Fire, Water, Impact and Sound resistance is achieved when MULTISTOP 4 is installed in accordance with relevant USG Boral technical installation guidelines.