Threaded Rod Hangers | USG Boral ME

Threaded Rod Hangers

The Threaded Rods are designed to be used in high tension due to being relatively long rods and being threaded.

They are used as a ceiling suspension by being fixed to hard point on one end such as soffit of concrete slab/beam or steel structure with appropriate fasteners and ceiling frame on the other.

ASTM & CODE STANDARDS:

- Rod ASTM-A449 hot dip galvanized

GREEN BENEFITS AND RECYCLED CONTENT: 

- LEED Credit MR 2 – USG Boral products are manufactured from cold formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream.
- LEED Credit MR 4 – USG Boral steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.

Physical Properties:
  • Carbon Steel
  • Surface Finishing = Zinc plated
  • Corrosion protection = 48 hours salt spray test
  • G43A Min Yield Strength 210 Mpa; Min Tensile Strength 320 Mpa
    Sizes:
  • Hangers Diameter 6.0 mm (M6)
  • Length: standard 3,000 mm Could be made as per customer requirements