Wafer Head Screw 13DH | USG Boral ME

Wafer Head Screw 13DH

Wafer head screws are drill point fasteners for fixing drywall profiles one to the other providing a large holding surface or for accessory mountings on steel structures up to 2.5 mm thickness.

Part of partitions & concealed ceiling systems

SPECIAL CHARACTERISTICS:

- Large wafer head
- Philips head recess
- Special drill point

RUST PROTECTION:

- Anti corrosion treatment by zinc coating
- Available in 10h, 48h and 100h salt spray test

ASTM & CODE STANDARDS:

These screws comply with:

- ASTM C 954 –00 standard specifications for steel drill screws for application of gypsum panel products or metal plaster bases to the steel stud.
- Australian standard AS 3566–1988 screws – self drilling – for the building and construction industries.

GREEN BENEFITS AND RECYCLED CONTENT: 

- LEED Credit MR 2 – USG products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream.
- LEED Credit MR 4 – USG’s steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.

Physical Properties:
  • Material : hardened steel
  • Finish : zinc finish
    Applications:
    In a concealed ceiling system, wafer head screws are used to fasten furring channel to main channel by a power screw driver. They are also used in all types of partition systems, such as for cinemas, auditorium, radio studios etc.…
  • Sizes:
  • Length : 13 mm
  • Head diameter : 8.0 mm
  • Quantity per box : 1000 nos