Flat Strap (Wall Bracing) | USG Boral ME

Flat Strap (Wall Bracing)

Used in framing applications as wall bracing which provides significant resistance to lateral loads

Used as X - Bracing in wall assembly to resist racking and comply with seismic requirements

System applies for walls height above 3.5m

ASTM & CODE STANDARDS:

- USG Boral Flat straps are produced to meet or exceed ASTM C645 and C955
- Galvanized sheet steel meets or exceeds requirements of ASTM A-653
- For installation & storage information refer to ASTM C1007 & C754

 GREEN BENEFITS AND RECYCLED CONTENT:  

- LEED Credit MR 2 – USG Boral products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream.
- LEED Credit MR 4 – USG Boral steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.

Physical Properties:
  • HDG Galvanized G90 Zinc coating weight
  • Yield stress, Fy 33 ksi Ultimate
    Sizes:
  • Thickness Range: 0.60, 0.70, 0.90, 1.2 and 1.5 mm
  • Width Range: 58 mm
  • Length: Coming in Roll of around 100 kg, Length could be cut as per requirements.