ECS6 - Standard Ceiling Exposed Grid - Mineral Fiber

ECS6 Standard Ceiling Exposed Grid - Mineral Fiber

Introduction

Exposed Grid Ceiling System is typically used for commercial and industrial applications which requires aesthetic ceiling finishes or easy access to the ceiling void above. The system consists of high quality pre-painted metal sections that form a grid when locked together into which high quality USG Boral Ceiling Tiles (Selections of Mineral Fiber panel 14mm or 16mm) can be installed.

Suitable to be applied at:

  • Office
  • Classroom
  • Hospital
  • Dept. Store

Supporting Material:

  • Frame: JayaBMS Hanger System (Bracket PN 220/221, Clip Adjuster PN 410/412, Rod PN 409), Donn DX Main Runner, Donn DX Cross Tee.
  • Board: 1 Layer of Jayapanel Mineral Fiber 14mm atau 16mm

Use Hitung Material fiture to help you figure total materials needed.

 

Specification:

  • Weight: 7 Kg/m2

Notes:

  • All the materials above calculated based on a room with a size of (10x10m). Another room sizes should be considered further.
  • Suspensioon gap max. of 1200mm
  • Primary frames gap max. 1200mm/600mm
  • Secondary frames gap max. 1200/600mm
  • All the materials above needs to be reconfirmed by the Contractor / Applicators regarding bookings material inquiry order.
  • Exclude waste material.

 

Information provided are for reference purpose only and due care has been taken to ensure accuracy at time of publication. Products, specifications and requirements may vary according to geographical locations and applications. As each project is unique, please contact your local Jayaboard representative for further assessment.